STONE TREATMENT
TENAX LIQUID WAX
TENAX PECTRO AND PECTRO BLACK
Apply to granite to eliminate webbing and fissures. Must be applied to a dry, clean surface with a sponge, cloth, or spray equipment. Remove any excess that stone can not absorb. Any excess may create a superficial gloss and sticky film. Dries in about 5 minutes. Pectro Black is for black stone. Quarts only.
Apply to restore shine and color to polished surfaces that are a little worn. Slight anti-stain and water repellent effect. Apply to granite, marble, and similar types of stone. Suitable for indoor and outdoor use. Apply a thin layer of wax to the clean surface. Wait some minutes and polish with fine wool or a dry cloth. Dries in 1-2 minutes. Quarts only.
TENAX HYDREX
Anti-stain water repellent. Makes the treated surface oil and water repellent. The surface may be polished or completely smooth. Apply to granite, marble, and stone of all types. Suitable for indoor and outdoor use. Does not change color. Drying time about 30 minutes, repellent in about 24 hours. Quarts only.
TENAX AGER
For wet effect. Generally applied to steeled, sawed, or smooth surfaces to give a wet look. Can also be applied to polished surfaces to enhance color. Apply to granite, marble, and stone of all types. Suitable for indoor and out door use. Dries in about 60 minutes. Quarts and 1/2 pint cans.
TENAX SKUDO
Anti-stain water-repellant for granite. Makes treated surfaces oil and water repellant. This is a water base product. Surface may be polished or completely smooth. For indoor or outdoor use. Will not change color of stone. Dries in 30 minutes, water repellant about 24 hours from application. This is a liquid, preferred for counter tops. Quarts and 1/2 pint cans.
