ANCHOR #211 STENCIL FILLER

A medium tack adhesive designed for with stencil #111, #112, #117, #153, #157, and #158.  On polished surfaces it is recommended that a light coat be applied.  For best results on frosted, axed or steeled surfaces, apply two coats.  Available in Gallons only.

ANCHOR #223 STENCIL FILLER

A low tack adhesive designed for use with stencil #123, #124, #154, and #129.  On polished surfaces it is recommended that a light coat be applied.  For best results on frosted, axed or steeled surfaces, apply two coats.   Available in Gallons only.

ANCHOR #333 STENCIL FILLER

Water Base Stencil Filler is water washable.  Compatible with all Anchor Stencil.  Using a cheap nylon brush, apply a thin even coat across the surface.  Allow the filler to dry, usually about 20 minutes.  Filler will change from a milky blue/white color to a slightly amber/clear when it is dry.  Simply wash off with soap and water.  Call for more information at 1-800-241-7105.   Available in Gallons only.

ANCHOR STENCIL #111

(43.0 mils-w/o liner) Tan rubber, with medium tack rubber adhesive, and a white liner.  Designed for hand cutting.  (12-3/4" and 14-1/2" are 2 rolls per case)  Available in widths of 12-3/4", 14-1/2, 18-3/4", 21", 25" and 30" in 10 yard rolls.

ANCHOR STENCIL #123Y (YELLOW) MYLAR AND #123 (CLEAR MYLAR)

(48.0 mils-w/o liner) Tan Rubber, with medium tack rubber adhesive, mylar sheet, and a light blue liner.  Designed for machine cutting.  Elberton inventory is yellow mylar.   Available in widths of 12-3/4", 15", 18-3/4",  21", 25" and 30" in 10 yards rolls (12-3/4" is 2 rolls per case-21" is clear mylar only)

ANCHOR STENCIL #154Y (YELLOW MYLAR) & #154 (CLEAR MYLAR)

(48.0 mil) Tan rubber with medium rubber adhesive, mylar sheet, and a light blue liner(#123).  Hole pattern is 1/2" on center for IBM type sprocket.  Available in 30", 25", 18-3/4", 15", 12-3/4" in 10 yard rolls.  30" and 25" available in 20 yard rolls.  18-3/4", 15", and 12-3/4" are Clear Mylar only.

ANCHOR STENCIL #124Y (YELLOW MAYLAR) & #124 (CLEAR MYLAR)

(48.0 mil) Tan rubber with medium tack rubber adhesive, mylar sheet, and a light blue liner. (123) Hole pattern is slotted with holes for Gerber type sprocket.  Available in 30" and 15" in 10 yard rolls.  30" also available in 20 yard rolls.

ANCHOR STENCIL #129Y (YELLOW MYLAR)

(46.0 mil) Tan rubber with medium tack rubber adhesive , yellow  mylar sheet, and a clear liner.  Hole pattern is slotted with holes for IBM, Gerber 15", and friction feed.  Rubber is trimmed back a 1/2" along each edge.  Available in 30"' 25" and 15" in 10 yard rolls.  30" and 25" in 20 yard rolls.

ANCHOR STENCIL #153

(41.0 mil) Tan rubber with medium tack rubber adhesive, clear mylar sheet, and a clear liner.  Unpunched, rubber is trimmed back a 1/2" along each edge for friction feed cutters.  Available in 19-7/8" and 24" in 10 yard rolls.

 

 

 

 

 

 

 

 

3M STENCIL FILLER #2

Light beige rubber base coating used to increase the adhesion of 3M Abrasive Blasting Stencils to stone monument surfaces during the blasting process.  Typically used on smooth or polished surfaces.  Available in Gallons and Quarts.

3M STENCIL FILLER #3

Same as #2 except designed for axed or frosted surfaces.  Available in Gallons only.

3M ABRASIVE BLASTING STENCIL #519Y (YELLOW LAMINATE)

48.0 mil (1.2mm) tan rubber adhesive, film laminate, with rubber adhesive, and easy release translucent white liner.  Die cut, double liner format.  Available as 12-1/2", 15", 18-3/4", 21", 25", and 30" in the 10 yard rolls.

3M ABRASIVE BLASTING STENCIL #520

45.0 mil (1.1 mm) tan rubber with gray rubber adhesive, with easy release clear film liner.  Hand and Die cut, single liner format.  Available in widths of 25", 18-3/4", and 15".

3M PREMIUM ABRASIVE BLASTING STENCIL YP SERIES

#519YP Hand-Cut and/or Die-Cut 15", 25" in 10 yard rolls.  30" in 10 and 20 yard rolls.

#519YPS Gerber compatible Computer Stencil 15" in 10 yard rolls.  30" in 10 and 20 yard. rolls

#519YPT IBM compatible Computer Stencil 15", 25", 27-1/2", 30", and 32-3/4" in 10 yard rolls.  25" and 30" are also available in 20 yard rolls.

Premium Product.  Tan rubber with yellow translucent polyester inner liner.  Extra thick translucent out liner for tracking.  Highest adhesion label for double linered products.  Wide format available.

3M STENCIL #519YT (YELLOW LAMINATE)

48.0 mil (1.2 mm) tan rubber with rubber adhesive, yellow film laminate, with rubber adhesive and easy release translucent white liner.  Computer cut, Tractor Feed, Double liner format.  Available in 30", 25", 21", 18-3/4, and 15" in 10 yard rolls.

3M STENCIL #519YS (YELLOW LAMINATE)

48.0 mil (1.2 mm) tan rubber with rubber adhesive, yellow film laminate, with rubber adhesive, and easy release translucent white liner.  Computer cut, Slot Punched, Double liner format.  Available as 30" and 15" in 10 yard rolls.   The 30" is also available as a 20 yard roll.

3M STENCIL #520T

45.0 mil (1.1 mm) tan rubber with gray rubber adhesive and easy release clear film liner.  Computer cut, Tractor Feed, Single liner format.  Available in 30", 25", 18-3/4, and 15" width in 10 yard rolls.

3M STENCIL #520S

45.0 mil (1.1 mm) tan rubber with gray rubber adhesive and easy release clear film liner.  Computer cut, Slot Punched, single liner format.  Available in 30" and 15" in 10 yard rolls.  The 30 available in 20 yard rolls.

3M STENCIL #523T

***Discontinued by 3M, check on available stock.***

3M STENCIL #523F

***Discontinued by 3M, check on available stock.***

3M STENCIL #520ETLT

45.0 mil. (1.1 mm) tan rubber backing with gray rubber adhesive and extra thick clear film liner.  Hand and Die-Cut.  Single Liner format.  Factory Order Only. Available as 25" in a 10 yard roll.

3M STENCIL #520HLR

45.0 mil. (1.1 mm) tan rubber with gray rubber adhesive and high release clear film liner.  Hand, Die and Computer-Cut.  Single Liner Format.  Factory Order Only.  Available in 10 yard rolls, 15" and 30".

3M STENCIL #1532

37.0 mil. (0.94 mm) tan rubber with tan rubber adhesive and high release clear film liner.  Hand and Die Cut, Single Liner format.  Factory Order Only.  Available in 10 yard rolls, 15" and 30".

3M STENCIL #1532S

37.0 mil. (0.94 mm) tan rubber with tan rubber adhesive and high release clear film liner.  Computer Cut, Slot Punched, Single Liner format.  Factory Order Only.  Available in 10 yard rolls, 15" and 30".

3M STENCIL #1532T

37.0 mil. (0.94 mm) tan rubber with tan rubber adhesive and high release clear film liner.  Computer Cut, Tractor Feed, Single Liner format.  Factory Order Only.  Available in 10 yard rolls, 15" and 30".