|
WELCOME TO |
|
PLASTIC STRIPS #7024 24" X 1/2" X 3/4" Each #7027 24" X 1" X 1" Each ![]()
NAME PLATES
Monumental Name Plates personalized with your company information. available in Aluminum or Stainless Steel. 2", 2-1/2", or 3" length, Flat or Bent, with optional Round Corners. Quantities of 100, 200, 500, or 1000. First time order or any changes made to a previous order will have a set up fee. Record of a previous order is kept for 3 years, eliminating any set up fee. Quantity ordered is subject to a 20% overrun or shortage. No Phone Orders, Please call at 1-800-241-7105 for the required Order Form.
SETTING BAR WITH ROLLERS
SETTING SUPPLIESNO. LENGTH STOCK WEIGHT 754 35" 7/8" 7 lbs.
SILICONE SEALANT
Sealant for stone joints available in caulking tubes. Colors: Grey Black White Bronze Clear Sold Individually or Case of 30 Tubes.
SETTING COMPOUND
Bicknell Setting Compound is the only grade needed for use during any season. Keep container sealed and store in a cool place for contents to remain pliable. Three colors are available in gallons and quarts. #214G Gallon Light Grey and #214Q Quart Light Grey #390G Gallon Dark Grey and #390Q Quart Dark Grey #012G Gallon Black (Quarts not Available) This product is not an adhesive. (Use Light Grey for marble). Sold per each or, case of 4 gallons, case of 6 quarts. ![]()
VASE SEAL
Available in a coil, 3/8" diameter x 15 ft. This sealant has an adhesive effect and is available in a green color only. Not for visible setting. This will stain stone. Sold per each or a full case 14. #U579.6
PLASTIC SETTING STRIPS
#7014 24" X 1" X 1/8" Each #7016 6" X 1" X 1/4" Each #7017 8" X 1" X 1/4" Each #7018 10" X 1" X 1/4" Each #7020 24" X 1" X 1/4" Each PLASTIC SETTING CUSHIONS #4-7000 1" X 1" X 1/16" Bag of 400 #7000 1" X 1" X 1/16" Bag of 100 #7001 1" X 1" X 1/8" Bag of 100 #7002 1" X 1" X 1/4" Bag of 100
PLASTIC BLOCKS
#7008 2" x 2" X 1" Box of 100
Non-Staining Plastic for your display
units, final setting, stacking inventory stock and slabs.
NON-SLIP CLAMP AND BAR
#773-20 (20" Bolt) #773-24 (24" Bolt) Non-slip clamp with wrench and bar. For raising and lowering the bottom end of 8" to 14" thick polished monuments when setting them. There is no danger of chipping the stone when using this clamp. Not for lifting the complete monument.
DIGGING BAR
NO. LENGTH STOCK WEIGHT 1529 6' 1-18" 23 lbs. Tapered Point on other end. ![]()
![]()
|